ISSN 2687-0568

Analysis of the Conditions of Mechanical Destruction of Clathrate Hydrates Using the Graphoanalytical Mohr Method

Authors
E.Yu.O. Balaev 1 , N.A. Shostak 2

1 Department of Oil and Gas Engineering named after Professor G.T. Vartumyan, Kuban State Technological University, Moskovskaya str., 2, Krasnodar, 350072, Russia

2 Higher School of Engineering “Oil and Gas and Energy Engineering”, Kuban State Technological University, Moskovskaya str., 2, Krasnodar, 350072, Russia

Rev. Adv. Mater. Technol., 2025, vol. 7, no. 1, pp. 10–17
Abstract

The article considers the mechanisms of mechanical destruction of clathrate hydrates. To determine the conditions of destruction, the hydrate is considered as a quasi-brittle body with insignificant plastic deformation during destruction. The possibility of using Mohr's graphoanalytical method to determine the critical values of tangential stresses arising under complex-stressed volumetric action during destruction by the method of pressure reduction (depression dissociation) is shown. The application of Freudenthal's theory with the presence of a critical defect in the material as a basis for forming an understanding of the relationship between the strength of the material and defects and the mechanics of hydrate destruction as a quasi-brittle material is also considered.

Keywords
Clathrate hydrates; Quasi-brittle material; Mohr-Coulomb theory; Mohr method; Freudenthal theory
References
Volume 7, No 1
pages 10-17
History
© 2025 ITMO University.
This is an open access article under the terms
of the CC BY-NC 4.0 license.
Metadata is available under the terms of the CC BY 4.0 license