1. G. Taylor & J. W. Christian, Experiments on the deformation of niobium single crystals. II. Electron microscope study of dislocation structures, Philos. Mag., 1967, vol. 15, no. 137, pp. 893-929.
2. G. Landford, M. Cohen, Microstructural analysis by high-voltage electron diffraction of severely drawn iron wires, Metall. Trans. A, 1975, vol. 6A, pp. 901-910.
3. V.I. Trefilov, Yu.V. Milman, S.A. Firstov, Physical fundamentals of refractory metals strength, Naukova Dumka, Kiev, 1975 (in Russian).
4. A.N. Vergazov, V.A. Likhachev, V.V. Rybin, Study of fragmented structure formed in molybdenum under active plastic deformation, Phys. Met. Metalloved., 1976, vol. 42, no. 7, pp. 1241-1246 (in Russian).
5. A.S.Rubtsov, V.V. Rybin, Structural features of plastic deformation at the stage of localized flow, Phys. Met. Metalloved., 1977, vol. 44, no. 3, pp. 611-622 (in Russian).
6. V.V. Rybin, A.A. Zisman, N.Yu. Zolotorevsky, Junction disclinations in plastically deformed crystals, Acta Metall. Mater., 1993, vol. 41, no. 7, pp. 2211-2217.
7. V.V. Rybin, Large plastic deformations and fracture of metals, Metallurgy, Moscow, 1986 (in Russian).
8. V.I. Vladimirov, A.E. Romanov, Disclinations in Crystals, Nauka, Leningrad, 1986.
9. B. Bay, N. Hansen, D.A. Hughes, D. Kuhlmann-Wilsdorf, Overview no. 96 evolution of f.c.c. deformation structures in polyslip, Acta Metall. Mater., 1992, vol. 40, no. 2, pp. 205-219.
10. D.A. Hughes, Q. Liu, D.C. Chrzan, N. Hansen, Scaling of microsructural parameters: misorientations of deformation induced boundaries, Acta Mater., 1997, vol. 45, pp. 105-112.
11. D.A. Hughes, N. Hansen, High angle boundaries formed by grain subdivision mechanisms, Acta Mater., 1997, vol. 45, no. 9, pp. 3871-3886.
12. R. Quey, P.R. Dawson, J.H. Driver, Grain orientation fragmentation in hot-deformed aluminium: Experiment and simulation, J. Mech. Phys. Sol., 2012, vol. 60, no 3, pp. 509-524.
13. R. Quey, J.H. Driver, P.R. Dawson, Intra-grain orientation distributions in hot-deformed aluminium: Orientation dependence and relation to deformation mechanisms, J. Mech. Phys. Sol., 2015, vol. 84, pp. 506-527.
14. A. Belyakov, T. Sakai, H. Miura, K. Tsuzaki, Grain refinement in copper under large strain deformation, Philos. Mag. A, 2001, vol. 81, no. 11, pp. 2629-2643.
15. A. Belykov, K. Tsuzaki, Y. Kimura, Regularities of deformation microstructures in ferritic stainless steels during large strain cold working, ISIJ International, 2008, vol. 48, no. 8, pp. 1071-1079.
16. T. Sakai, A. Belyakov, R. Kaibyshev, H. Miura, J.J. Jonas, Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions, Prog. Mater. Sci., 2014, vol. 60, pp. 130-207.
17. F.J. Humphreys, M. Hatherly, Recrystallization and related annealing phenomena, Elsevier Science Ltd., Pergamon, Oxford, 2004.
18. D.A. Hughes, N. Hansen, The microstructural origin of work hardening stages, Acta Mater., 2018, vol. 148, pp. 374-383.
19. H. Hallberg, S.K. As, B. Skallerud, Crystal plasticity modeling of microstructure influence on fatigue crack initiation in extruded Al6082-T6 with surface irregularities, Int. J. Fatigue, 2018, vol. 111, pp. 16-32.
20. K. Sedighiani, K. Traka, F. Roters, J. Sietsma, D. Raabe, M. Diehl, Crystal plasticity simulation of in-grain microstructural evolution during large deformation of IF-steel, Acta Mater., 2022, vol. 237, art. no. 118167.
21. K.K. Alaneme, E.A. Okotete, Recrystallization mechanisms and microstructure development in emerging metallic materials: A review, Journal of Science: Advanced Materials and Devices, 2019, vol. 4, no 1, pp. 19-33.
22. Y. Estrin, A. Vinogradov, Extreme grain refinement by severe plastic deformation: a wealth of challenging science, Acta Mater., 2013, vol. 61, no. 3, pp. 782-817.
23. Q. Liu, D. Juul Jensen, N. Hansen, Effect of grain orientation on deformation structure in cold-rolled polycrystalline aluminium, Acta Mater., 1998, vol. 46, no. 16, pp. 5819-5838.
24. X. Huang, G. Winther, Dislocation structures. Part I. Grain orientation dependence, Philos. Mag., 2007, vol. 87, no. 33, pp. 5189-5214.
25. G. Winther, X. Huang, Dislocation structures. Part II. Slip system dependence, Philos. Mag., 2007, vol. 87, no. 33, pp. 5215-5235.
26. N. Hansen, X. Huang, G. Winther, Effect of grain boundaries and grain orientation on structure and properties, Metall. Mater. Trans. A, 2011, vol. 42, pp. 613-625.
27. C. Hong, X. Huang, G. Winther, Dislocation content of geometrically necessary boundaries aligned with slip planes in rolled aluminium, Philos. Mag., 2013, vol. 93, no. 23, pp. 3118-3141.
28. A. Haldar, X. Huang, T. Leffers, N. Hansen, R.K. Ray, Grain orientation dependence of microstructures in a warm rolled IF steel, Acta Mater., 2004, vol. 52, no. 18, pp. 5405-5418.
29. H.S. Chen, A. Godfrey, N. Hansen, J.X. Xie, Q. Liu, Microstructure-grain orientation relationship in coarse grain nickel cold-rolled to large strain, Mater. Sci. Eng. A, 2008, vol. 483-484, pp. 157-160.
30. X. Huang, N. Hansen, Grain orientation dependence of microstructure in aluminium deformed in tension, Scr. Mater., 1997, vol. 37, no. 1, pp. l-7.
31. X. Huang, Grain orientation effect on microstructure in tensile strained copper, Scr. Mater., 1998, vol. 38, no. 11, pp. 1697-1703.
32. X. Huang, A. Borrego, W. Pantleon, Polycrystal deformation and single crystal deformation: dislocation structure and flow stress in copper, Mater. Sci. Eng. A, 2001, vol. 319-321, pp. 237-241.
33. N. Hansen X. Huang, W. Pantleon, G. Winther, Grain orientation and dislocation patterns, Philos. Mag., 2006, vol. 86, no. 25-26, pp. 3981-3994.
34. G.M. Le, A. Godfrey, C.S. Hong, X. Huang and G. Winther, Orientation dependence of the deformation microstructure in compressed aluminum, Scr. Mater., 2012, vol. 66, no. 6, pp. 359-362.
35. P. Cizek, Dislocation boundaries and disclinations formed within the cube-oriented grains during tensile deformation of aluminium, Acta Mater., 2010, vol. 58, no. 17, pp. 5820-5833.
36. P. Cizek, F. Bai, E.J. Palmiere, W.M. Rainforth, EBSD study of the orientation dependence of substructure characteristics in a model Fe-30wt%Ni alloy subjected to hot deformation, J. Microsc., 2005, vol. 217, no. 2, pp. 138-151.
37. A.S. Taylor, P. Cizek, P.D. Hodgson, Orientation dependence of the substructure characteristics in a Ni-30Fe austenitic model alloy deformed in hot plane strain compression, Acta Mater., 2012, vol. 60, no. 4, pp. 1548-1569.
38. D. Poddar, P. Cizek, H. Beladi, P.D. Hodgson, Orientation dependence of the deformation microstructure in a Fe-30Ni-Nb model austenitic steel subjected to hot uniaxial compression, Metall. Mater. Trans. A, 2015, vol. 46, pp. 5933-5951.
39. J. Baton, W. Geslin, C. Moussa, Orientation and deformation conditions dependence of dislocation substructures in cold deformed pure tantalum, Mater. Charact., 2021, vol. 171, art. no. 110789.
40. P.J. Hurley, F.J. Humphreys, The application of EBSD to the study of substructural development in a cold rolled single-phase aluminium alloy, Acta Mater., 2003, vol. 51, no. 4, pp. 1087-1102.
41. P.J. Hurley, P.S. Bate, F.J. Humphreys, An objective study of substructural boundary alignment in aluminium, Acta Mater., 2003, vol. 51, no. 16, pp. 4737-4750.
42. F.J. Humphreys, P.S. Bate, The microstructures of polycrystalline Al-0.1Mg after hot plane strain compression, Acta Mater., 2007, vol. 55, no. 16, pp. 5630-5645.
43. V. Randle, N. Hansen, D. Juul Jensen, The deformation behaviour of grain boundary regions in polycrystalline aluminium, Philos. Mag. A, 1996, vol. 73, no. 2, pp. 265-282.
44. Q. Liu, N. Hansen, Microstructural study of deformation in grain boundary region during plastic deformation of polycrystalline aluminium, Mater. Sci. Eng. A, 1997, vol. 234-236, pp. 672-675.
45. Q. Sun, Y. Ni, S. Wang, Orientation dependence of dislocation structure in surface grain of pure copper deformed in tension, Acta Mater., 2021, vol. 203, art. no. 116474.
46. B.L. Li, A. Godfrey, Q.C. Meng, Q. Liu, N. Hansen, Microstructural evolution of IF-steel during cold rolling, Acta Mater., 2004, vol. 52, no 4, pp. 1069-1081.
47. G. Ma, D.A. Hughes, A.W. Godfrey, Q. Chen, N. Hansen, G. Wu, Microstructure and strength of a tantalum-tungsten alloy after cold rolling from small to large strains, J. Mater. Sci. Technol., 2021, vol. 83, pp. 34-48.
48. N. Afrin, M.Z. Quadir, P.R. Munroe, M. Ferry, Unusual crystallographic aspects of microband boundaries within {111}<110> oriented grains in a cold rolled interstitial free steel, ISIJ International, 2014, vol. 54, no. 6, pp. 1346-1352.
49. N. Zolotorevsky, E. Ushanova, V. Rybin, V. Perevezen-tsev, Characterization of fragmented structure developed during necking of iron tensile specimen, Letters on Materials, 2021, vol. 11, no 4, pp. 503-507.
50. N. Zolotorevsky, V. Rybin, E. Ushanova, N. Ermakova, V. Perevezentsev, Large-scale fragmentation of grains in plastically deformed polycrystalline iron, Mater. Today Commun., 2022, vol. 31, art. no. 103816.
51. G.I. Taylor, Plastic strains in metals, J. Inst. Metals, 1938, vol. 62, pp. 307-324.
52. P. Van Houtte, S. Li, M. Seefeldt, L. Delannay, Deformation texture prediction: From the Taylor model to the advanced Lamel model, Int. J. Plast., 2005, vol. 21, no. 3, pp. 589-624.
53. N.Yu. Zolotorevskii, Yu.F. Titovets, N.Yu. Ermakova, Microstructure evolution inside grains of aluminium polycrystal under compression, The Physiscs of Metals and Metallography, 2002, vol. 93, no. 1, pp. 86-93.
54. N.Yu. Ermakova, N.Yu. Zolotorevsky, Yu.F. Titovets, Quantitative X-ray analysis of deformation microtexture within individual grains, Mater. Sci. Forum, 2005, vol. 495-497, pp. 983-988.
55. R. Quey, D. Piot, J.H. Driver, Microtexture tracking in hot-deformed polycrystalline aluminium: Experimental results, Acta Mater., 2010, vol. 58, no 5, pp. 1629-1642.
56. R. Quey, J.H. Driver, Microtexture tracking of sub-boundary evolution during hot deformation of aluminium, Mater. Charact., 2011, vol. 62, no. 12, pp. 1222-1227.
57. D. Raabe, Z. Zhao, W. Mao, On the dependence of in-grain subdivision and deformation texture of aluminum on grain interaction, Acta Mater., 2002, vol. 50, no. 17, pp. 4379-4394.
58. D.P. Field, A. Alankar, Observation of deformation and lattice rotation in a Cu bicrystal, Metall. Mater. Trans. A, 2011, vol. 42A, pp. 676-683.
59. G. Winther, J.P. Wright, S. Schmidt, J. Oddershede, Grain interaction mechanisms leading to intragranular orientation spread in tensile deformed bulk grains of interstitial-free steel, Int. J. Plast., 2017, vol. 88, pp. 108-125.
60. N. Allain-Bonasso, F. Wagner, S. Berbenni, D.P. Field, A study of the heterogeneity of plastic deformation in IF steel by EBSD, Mater. Sci. Eng. A, 2012, vol. 548, pp. 56-63.
61. J. Oddershede, J.P. Wright, A. Beaudoin, G. Winther, Deformation-induced orientation spread in individual bulk grains of an interstitial-free steel, Acta Mater., 2015, vol. 85, pp. 301-313.
62. H. Pirgazi, L.A.I. Kestens, Semi in-situ observation of crystal rotation during cold rolling of commercially pure aluminum, Mater. Charact., 2021, vol. 171, art. no. 110752.
63. S. Subedi, R. Pokharel, A.D. Rollett, Orientation gradients in relation to grain boundaries at varying strain level and spatial resolution, Mater. Sci. Eng. A, 2015, vol. 638, pp. 348-356.
64. N.S. De Vincentis, A. Roatta, R.E. Bolmaro, J.W. Signorelli, EBSD Analysis of orientation gradients developed near grain boundaries, Mater. Res., 2019, vol. 22, no. 1, art. no. e20180412.
65. H. Hu, Microbands in rolled Fe-Si crystals and their role in recrystallization, Acta Metall., 1962, vol. 10, no. 11, pp. 1112-1116.
66. I.L. Dillamore, P.L. Morris, C.J.E. Smith, W.B. Hutchinson, Transition bands and recrystallization in metals, Proc. R. Soc. Lond. A, 1972, vol. 329, no. 1579, pp. 405-420.
67. E. Aernoudt, P. Van Houtte, T. Leffers, Deformation and textures of metals at large strains, in: R.W. Cahn, P. Haasen, E.J. Kramer (Eds.), Materials Science and Technology, VCH, Weinheim, 1993, pp. 89-136.
68. T. Morikawa, R. Kurosaka, M. Tanaka, T. Ichie, K. Murakami, Grain subdivision mechanism for constructing lamellar microstructure in cold-rolled ultra-low carbon, ISIJ International, 2022, vol. 62, no. 2, pp. 335-342.
69. P.B. Prangnell, J.R. Bowen, P.J. Apps, Ultra-fine grain structures in aluminium alloys by severe deformation processing, Mater. Sci. Eng. A, 2004, vol. 375-377, pp. 178-185.
70. Y. Huang, P.B. Prangnell, Orientation splitting and its contribution to grain refinement during equal channel angular extrusion, J. Mater. Sci., 2008, vol. 43, pp. 7273-7279.
71. A.P. Zhilyaev, K. Oh-ishi, G.I. Raab, T.R. McNelley, Influence of ECAP processing parameters on texture and microstructure of commercially pure aluminum, Mater. Sci. Eng. A, 2006, vol. 441, no. 1-2, pp. 245-252.
72. L. Zhu, M. Seefeldt, B. Verlinden, Three Nb single crystals processed by equal- channel angular pressing - Part II: Mesoscopic bands, Acta Mater., 2013, vol. 61, no. 12, pp. 4504-4511.
73. L. Zhu, M. Seefeldt, B. Verlinden, Deformation banding in a Nb polycrystal deformed by successive compression tests, Acta Mater., 2012, vol. 60, no. 10, pp. 4349-4358.
74. C. Thorning, M.A.J. Somers, J.A. Wert, Grain interaction effects in polycrystalline Cu, Mater. Sci. Eng. A, 2005, vol. 397, no. 1-2, pp. 215-228.
75. J.A. Wert, C.T. Thorning, Grain subdivision in polycrystalline copper subject to tensile deformation, Mater. Sci. Technol., 2005, vol. 21, no. 12, pp. 1401-1406.
76. N. Afrin, M.Z. Quadir, M. Ferry, Formation of highly misoriented fragments at hot band grain boundaries during cold rolling of Interstitial-Free Steel, Metall. Mater. Trans. A, 2015, vol. 46, pp. 2956-2964.
77. Z. Yanushkevich, A. Belyakov, R. Kaibyshev, Microstructural evolution of a 304-type austenitic stainless steel during rolling at temperatures of 773-1273 K, Acta Mater., 2015, vol. 82, pp. 244-254.
78. N.Yu. Zolotorevsky, V.V. Rybin, E.A. Ushanova, V.N. Perevezentsev, Effect of deformation temperature on the microstructure and texture evolution in copper during tension, Letters on Materials, 2023, vol. 13, no. 4, pp. 362-367.
79. N.Y. Zolotorevsky, V.V. Rybin, E.A. Ushanova, A.N. Matvienko, V.N. Perevezentsev, Comparative study of grain fragmentation in iron during cold and warm deformation by uniaxial tension, Mater. Phys. Mech., 2022, vol. 50, no. 2, pp. 239-251.
80. W.F. Hosford, Microstructural changes during deformation of [110] fiber-textured metals, Trans, Metall. Soc. AIME, 1964, vol. 230, pp. 12-15.
81. W. Pantleon, The evolution of disorientations for several types of boundaries, Mater. Sci. Eng. A, 2001, vol. 319-321, pp. 211-215.
82. Z.P. Luo, H.W. Zhang, N. Hansen, K. Lu, Quantification of the microstructures of high purity nickel subjected to dynamic plastic deformation, Acta Mater., 2012, vol. 60, no. 3, pp. 1322-1333.
83. Z.P. Luo, O.V. Mishin, Y.B. Zhang, H.W. Zhang, K. Lu, Microstructural characterization of nickel subjected to dynamic plastic deformation, Scr. Mater., 2012, vol. 66, no. 6, pp. 335-338.
84. N.Yu. Zolotorevsky, V.V. Rybin, A.N. Matvienko, E.A. Ushanova, S.A. Philippov, Misorientation angle distribution of deformation-induced boundaries provided by their EBSD-based separation from original grain boundaries: Case study of copper deformed by compression, Mater. Charact., 2019, vol. 147, pp. 184-192.
85. N.Yu. Zolotorevsky, V.V. Rybin, A.N. Matvienko, E.A. Ushanova, S.N. Sergeev. Misorientation distribution of high angle boundaries formed by grain fragmentation: EBSD-based characterization and analysis performed on heavily deformed iron, Letters on Materials, 2018, vol. 8, no. 3, pp. 305-310.
86. N.Yu. Zolotorevsky, V.V. Rybin, E.A. Ushanova, V.N. Perevezentsev, The scaling of misorientation angle distribution at strain-induced boundaries in copper deformed by tension under various conditions, St. Petersburg State Polytechnical University Journal. Physics and Mathematics, 2024, vol. 17, no. 1, pp. 71-80.
87. G. Salishchev, S. Mironov, S. Zherebtsov, A. Belyakov, Changes in misorientations of grain boundaries in titanium during deformation, Mater. Charact., 2010, vol. 61, no. 7, pp. 732-739.
88. B. Beausir, C. Fressengeas, Disclination densities from EBSD orientation mapping, Int. J. Solids Struct., 2013, vol. 50, no. 1, pp. 137-146.
89. C. Fressengeas, B. Beausir, Tangential continuity of the curvature tensor at grain boundaries underpins disclination density determination from spatially mapped orientation data, Int. J. Solids Struct., 2019, vol. 156-157, pp. 210-215.
90. S. Demouchy, M. Thieme, F. Barou, B. Beausir, V. Taupin, P. Cordier, Dislocation and disclination densities in experimentally deformed polycrystalline olivine, Eur. J. Mineral., 2023, vol. 35, no. 2, pp. 219-242.
91. A.C. Leff, C.R. Weinberger, M.L. Taheri, On the accessibility of the disclination tensor from spatially mapped orientation data, Acta Mater., 2017, vol. 138, pp. 161-173.
92. S. Zhu, A.P. Jivkov, E. Borodin, A. Bodyakova, Triple junction disclinations in severely deformed Cu-0.4%Mg alloys, Acta Mater., 2024, vol. 264, art. no. 119600.
93. V.I. Vladimirov, A.E. Romanov, Partial disclination dipole motion under plastic deformation, Sov. Phys. Solid State, 1978, vol. 20, pp. 1795-1800.
94. M. Seefeldt, L. Delannay, B. Peeters, E. Aernoudt, P. Van Houtte, Modelling the initial stage of grain subdivision with the help of a coupled substructure and texture evolution algorithm, 2001, Acta Mater., vol. 49, no. 12, pp. 2129-2143.
95. A. Zisman, E. Nesterova, V. Rybin, C. Teodosiu, Interfacial misorientations and underlying slip activity of a shear microband in mild steel: TEM analysis and numerical simulation, Scr. Mater., 2002, vol. 46, no. 10, pp. 729-733.
96. T.S. Orlova, A.A. Nazarov, N.A. Enikeev, I.V. Alexandrov, R.Z. Valiev, and A.E. Romanov, Grain size refinement due to relaxation of disclination junction configurations in the course of plastic deformation of polycrystals, Phys. Solid State, 2005, vol. 47, no. 5, pp. 845-851.
97. A.A. Nazarov, N.A. Enikeev, A.E. Romanov, T.S. Orlova, I.V. Alexandrov, I.J. Beyerlein, R.Z. Valiev, Analysis of substructure evolution during simple shear of polycrystals by means of a combined viscoplastic self-consistent and disclination modeling approach, Acta Mater., 2006, vol. 54, no. 4, pp. 985-995.
98. L.S. Tóth, Y. Estrin, R. Lapovok, C. Gu, A model of grain fragmentation based on lattice curvature, Acta Mater., 2010, vol. 58, no. 5, pp. 1782-1794.
99. N.Y. Zolotorevsky, N.Y.Ermakova, V.S. Sizova, E.A. Ushanova, V.V. Rybin, Experimental characterization and modeling of misorientations induced by plastic deformation at boundaries of annealing twins in austenitic steel, J. Mater. Sci., 2017, vol. 52, pp. 4172-4181.
100. W.Q. Gao, C.L. Zhang, M.X. Yang, S.Q. Zhang, D. Juul Jensen, A. Godfrey, Strain distribution and lattice rotations during in-situ tension of aluminum with a transmodal grain structure, Mater. Sci. Eng. A, 2021, vol. 828, art. no. 142010.
101. S. Nagarajan, R. Jain, N.P. Gurao, Microstructural characteristics governing the lattice rotation in Al-Mg alloy using in-situ EBSD, Mater. Charact., 2021, vol. 180, art. no. 111405.
102. E.N. Borodin, V. Bratov, Non-equilibrium approach to prediction of microstructure evolution for metals undergoing severe plastic deformation, Mater. Charact., 2018, vol. 141, pp. 267-278.
103. E.N. Borodin, A. Morozova, V. Bratov, A. Belyakov, A.P. Jivkov, Experimental and numerical analyses of microstructure evolution of Cu-Cr-Zr alloys during severe plastic deformation, Mater. Charact., 2019, vol. 156, art. no. 109849.
104. P. Van Houtte, S. Li, M. Seefeldt, & L. Delannay, Deformation texture prediction: From the Taylor model to the advanced Lamel model, 2005, Int. J. Plast., vol. 21, no. 3, pp. 589-624.
105. N.Y. Zolotorevsky, V.V. Rybin, Deformation of fragmented polycrystals and texture formation, Phys. Met. Metalloved., 1985, vol. 59, no. 3, pp. 440-449 (in Russian).
106. A. Zisman, Model for partitioning slip patterns at triple junctions of grains, Int. J. Eng. Sci., 2017, vol. 116, pp. 155-164.
107. A. Krishna Kanjarla, P. Van Houtte, L. Delannay, Assessment of plastic heterogeneity in grain interaction models using crystal plasticity finite element method, Int. J. Plast., 2010, vol. 26, no. 8, pp. 1220-1233.
